PointMaster - Brick replacement & brickwork repair

Or call 0845 116 0284 *
Deep fill capability for brick replacement

Deep fill capability for brick replacement (complete filling)

Sometimes, particularly with old walls and buildings, bricks can crumble and even fail completely. If left untreated, this can effect the building's structural integrity. But replacement is an intricate and often time consuming process. Ensuring a good quality fill is essential for structural re-inforcement, but by using conventional methods this is often difficult to achieve..

The PointMaster once again makes this process simple. Once the brick has been seated, the Point Master can fill the joint from front to back around the other surfaces. The entire process is greatly simplified. Joints should be struck and finished as required.

By completely refilling the joint, structural integrity can then be restored.

One of the great strengths of the PointMaster is its ability to infill to a far greater depth than other tools available. This is largely due to its hi capacity nozzle, which allows mortar to flow freely to the back of the joint.

One reported customer application was a dockside repair; where tidal river water had ingressed far into the dock side, risking collapse of the dock front. Repairs were undertaken and made good in one tidal phase.

Image of the Pointmaster pointing gun tool

What other applications can I use it for?

It is suitable for most applications using regular cement mortar, lime mortar and grout for flooring. It works with most common mix ratios, and is fine with mortar colourant.

X

Changes to 0845 numbers

Our older telephone number: 0845 116 0284 is no longer local rate from anywhere in the UK.

Calls now cost 5p per minute plus your standard network rate

Please call us on +44 (0) 208 133 5396 which is our standard UK geographical number.

The Point Master team.